The bearing capacity of the bowl buckle scaffold is very large, and it has good mechanical properties of shear resistance, bending resistance, torque resistance and so on. Relatively safe and reliable, will not occur the phenomenon of joint out of the occurrence. The process is very simple, can be directly modified. Convenient for site management, civilized construction, easy transportation and other important characteristics. The appearance of the bowl buckle scaffold is beautiful and generous, and the workpiece is stacked neatly. And after knock, will not affect the continued use, do not need to carry out maintenance, and repair.
The connection between the diagonal and vertical poles of the bowl-buckle scaffold is the same. For different sizes kuangala should be equipped with a response bar. The skew bar can be installed as a nodal skew bar, or it can be a non-nodal skew bar. The inclined rod should be set at the node of the frame as far as possible. For the scaffolding with a height of more than 30 meters, one fifth or even one half of the overall facade can be set up with the inclined rod cotton according to the load. The evenly spaced arrangement in the middle and the diagonal bar set inside the transverse frame is the diagonal bar of the corridor, which is very important to improve the stability of the scaffold. When setting up the high level unloading straw, it is necessary to set up the corridor horizontal inclined bar on the first floor above the node, so as to prevent the deformation of the horizontal frame during unloading. The inclined rod can be replaced by steel pipe and fastener, or it can be replaced by bowl buckle scaffold specification.
